You may need that mechanical help, which is your winch, to help get you out of a sticky or muddy situation when you decide to carry your Jeep to the backcountry. They would also tend to act as insurance to help you out of difficult terrain no matter how rugged your Jeep is. The size and model of your Jeep would determine the winch capacity that would suit your car. Below are a few steps that can help you make the right decision on which type of winch best fits your Jeep.
1. The Winch’s Pull Rating
It blends the winch’s mechanical capacity with the line’s tensile strength on the winch’s drum. In considering the manufacturer pull rating, it is necessary to note that the winch’s rated capacity is based on the first line of cable that is closest to the drum. With more than three to four cable layers, an exemption to the self-determined capacity is done when the manufacturer clearly states it. To determine the amount of pull rating that is adequate for your Jeep, you need to take the Gross Vehicle Weight of the Jeep and multiply it by 1.5 or 2.0. Compare the required rating for your Jeep to the winch’s pull rating to determine the right one.
2. The Winch’s Mode Of Operation
Each 4×4 winch is either operated with the means of electricity or hydraulics. Both types are good, but each has pros and cons that would benefit different Jeeps. Yes, of course, the electric winch is faster in operation, comes with a cool remote, and is easier to install than its hydraulic counterpart; the electric winch draws its power from the battery of the Jeep, which would not be good for some Jeeps that come with battery power that is too low for its constant operation and normal function of the engine. So, before choosing an electric winch for your Jeep, it is important to check and compare the ampere rating to know whether it would deliver the required ampere to the winch.
Aside from the electric winch, the hydraulic winch still exists; it may be somewhat less than the electric one, it still delivers enough punch. The hydraulic winch gets its power from the steering pump of the Jeep, which then allows it to wind or unwind the lines. They are commonly used by Jeeps that ply routes that are normally muddy or flooded because of their resistance to water and low need for electrical power. As simple as it seems, not all Jeeps can fit the hydraulic winch properly.
3. Length Of The Line
Another important factor one needs to consider in choosing the right winch capacity. With a long line, you could reach out to distant objects that can help you pull out of the situation and get the maximum pull of the winch, although long lines tend to get jammed or congested together easily. The solution to the problem would involve getting a winch with cables made of synthetic materials rather than of wire.
If you own a Jeep and require many jeep accessories, Tuff Stuff 4×4 is a great place to find all kinds of things in one place.
